Beranda > Produk > Beban Elektronik DC > Beban elektronik 1200V DC > 1200V 24200W Muatan Elektronik DC yang Dapat Diprogram
  • Deskripsi Produk
Overview
Atribut Produk

Model NoEL1200VDC24200W

MerekAPM

Tempat AsalCina

Input Voltage0~1200V

Input Current0~880A

Input Power0~24200W

Voltage Readback Accuracy0.015%+0.015%F.S.

Current Readback Accuracy0.04%+0.06%F.S.

Power Readback Accuracy0.1%+0.1%F.S.

Height13U

Warranty2 years

InterfaceRS232/RS485/USB(Standard)

Kemampuan Pasokan & Informasi Tambahan

KemasanKotak kayu

Produktivitasother

TransportasiOcean,Land,Air

Tempat asalCINA

Dukungan tentangother

SertifikatISO9001/CE/ROHS/CSA/UL

Kode HS8543709990

PelabuhanDHL

Jenis pembayaranT/T

InkotermEXW

& pengiriman paket
Menjual unit:
Piece/Pieces
Tipe paket:
Kotak kayu
Contoh pada gamba:

APM techonogies programmable DC electr onic load 1200V 24200W support high c urrent to be 880A and power to be 24200W. This CC dynamic sweep allows the user to edit two load levels, start frequency, end frequency, step frequency, dwell etc. The sampling rate is up to 500kHz, which make it can simulate different loading conditions for most test requirements.

APM techonogies also have 200V DC Electronic Load and 600V DC Electronic Load for lower voltage options.Two or more loads can be connected in master-slave parallel mode to provide more power or current capacity to make Dc Electronic Load System with 200V DC Electronic Load System,600V DC Electronic Load System,1200V DC Electronic Load System.


Functions & Advantages:

Flippable Front Panel and Color Touch Screen
This series programmable DC electronic load is equipped with flippable front panel for 4U, 7U, 10U and 13U height models. Together with a large color touch screen provides simple and fast operation for customer. Real-time update of display input data, status and graphical display makes it more intuitive.


Multiple Operating Mode

This series programmable DC electronic load provides four kinds of basic operating mode including CV (constant voltage), CC (constant current), CR (constant resistance), CP (constant power), to satisfy a wide range of test requirements.


Adjustable CV Loop Speed
This series electronic load supports CV loop response speed setting to FAST, NORMAL or SLOW to satisfy different test requirements. This function may avoid the inaccurate measurement or testing fail caused by the response speed mismatch between the load and the power supply, which is possible to improve test efficiency and reduce costs on the equipments, time and expenses.


Dynamic Load

This series electronic load can be switched quickly between different values in the same operating mode, including CC dynamic mode, CV dynamic mode, CR dynamic mode and CP dynamic mode, CC/CR high speed dynamic mode up to 50kHz. This function is suitable for transient test of power supply, test of battery protection characteristic and battery pulse charging etc. Dynamic mode test has continuous mode, pulse mode and toggle mode.


Sine Wave Dynamic Load
This series electronic load supports sine wave loading function which allows to load sine wave,can be used for impedance analysis test of fuel cells.


Dynamic Frequency Sweep Function

This series electronic load provides a unique constant current dynamic sweep to use frequency conversion to find out the UUT voltage of worst case.
This CC dynamic sweep allows the user to edit two load levels, start frequency, end frequency, step frequency, dwell etc.
The sampling rate is up to 500kHz, which make it can simulate different loading conditions for most test requirements.


Battery Discharge Test
This series electronic load has battery discharge function, and can perform discharge test under CC, CR or CP mode. The DC load can set end voltage or time to stop loading correctly and make sure the battery is not damaged due to over discharge. The user can set stop conditions, whenever met any condition, the load will stop loading and counting automatically. During the test, users can observe battery's voltage, discharging time and already-discharged-capacity.

Mode otomatis

This mode allows automatically switches among CV, CR, CC and CP modes. It is suitable for lithium ion battery charger testing to get a complete VI charging curve. This flexible auto mode also enormously improve test efficiency.


OCP/OPP Tests

This series electronic load provides OCP and OPP modes are mainly applied in over-current and over-power points tests. After the testing the load can automatically judge the test result according to the set specifications. Take OPP testing as example, the OPP provides ramped up power for the load to test the UUT voltage whether has reached trigger voltage level and to judge if the protection is acting normally or not.


List Mode

The list function allows user to create waveform files to automatically simulate various complicated loading conditions. The list mode has 10 files, by editing operating mode (including CC, CV, CR,CP, Short and ON/OFF), repeat times, total steps, setting value of each step and step time etc. This function can be applied to the testing of output characteristic and stability for power supply.


Master/Slave Control

This series electronic load provides the user with Master/slave mode, supports parallel connection under different power and same voltage and dynamically synchronized. In Master/slave mode, the user only need to control the master one, the load current will be automatically calculated and downloaded to the slave loads. The Master/slave mode greatly simplifies the operation when increased power is needed.


External Control and Current/Voltage Monitoring

This series electronic load has analog control interface to control the input voltage and current. The external signal 0 to 10V controls the sinking condition from 0 to full scale. Using the external control mode can simulate arbitrary waveform which is ideal for industrial control requirement.
The 0 to 10V analog output signal of V-MON/I-MON terminals represent input to which the terminals belong from 0 to full range.
An external voltmeter or oscilloscope can be connected to display input voltage/current change.


Kategori Produk : Beban Elektronik DC > Beban elektronik 1200V DC

Tinjauan Perusahaan
APM Technologies (Dongguan) Co., Ltd. adalah perusahaan berteknologi tinggi yang berspesialisasi dalam penelitian & pengembangan (R&D), produksi dan distribusi sistem pintar laut (MSS), inverter surya PV, catu daya yang dapat diprogram , sistem pengujian otomatis dan otomatis peralatan manufaktur. Perusahaan kami memiliki sistem lengkap dalam perencanaan produk, penelitian & pengembangan, eksperimen laboratorium, pengujian, dan kontrol kualitas. Selain itu, kami telah melewati sertifikasi standar ISO 9001. Tim R&D APM Technologies terdiri dari lebih dari 100 personel yang meliputi Ph.D. dan pemegang gelar master serta pakar senior di industri terkait. Dengan berkolaborasi dengan sejumlah tim peneliti domestik dan internasional dan mempertahankan kerja sama strategis jangka panjang dengan perguruan tinggi dan universitas terkemuka, perusahaan kami dapat memastikan produk dan layanan memimpin industri. Melalui penerapan teknik dan teknologi profesional kami untuk terus berinovasi dan menerobos, sejauh ini teknologi APM telah diterapkan untuk sejumlah paten penemuan dan sudah memperoleh sejumlah paten utilitas, paten desain, hak cipta perangkat lunak, dan paten terkait lainnya. Produk kami telah melewati sertifikasi CE, VDE, SAA, CQC, CSA, FCC, dll. APM Technologies dari awal hingga saat ini, dan dari masa lalu ke masa depan, selalu menjunjung tinggi semangat perusahaan "pengejaran keunggulan yang konstan" sehingga memberi pelanggan kami "24 jam sehari dengan layanan berkelanjutan".
Foto perusahaan
Sertifikasi produksi
Unduh
Beranda > Produk > Beban Elektronik DC > Beban elektronik 1200V DC > 1200V 24200W Muatan Elektronik DC yang Dapat Diprogram
Email ke pemasok ini
  • *Subjek:
  • *Untuk:
    Ms. Emily Cui
  • *Email:
  • *Pesan:
    Pesan Anda harus antara 20-8000 karakter
Kirim permintaan
*
*

Rumah

Product

Phone

Tentang kami

Permintaan

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Kirim